UKSSSC Technician Grade-II Syllabus and Exam Pattern: Electrical (Vidyut) and Mechanical (Fitter) Posts

Last Updated: Oct 9, 2026 Source: Official Uksssc Notification | sssc.uk.gov.in

The Uttarakhand Subordinate Service Selection Commission (UKSSSC) has released the syllabus and examination scheme for Technician Grade-II (Electrical) and Technician Grade-II (Mechanical) posts under Uttarakhand Jal Vidyut Nigam Limited (UJVNL) and Power Transmission Corporation of Uttarakhand Limited (PTCUL). The notice is dated 05 October 2026 and is available on the Commission’s website.

The two posts do not share one syllabus. Electrical candidates follow a 13-unit syllabus, while Mechanical candidates follow a 9-unit Fitter trade syllabus. This page keeps both separate, so you can go straight to the section that matches your post.

Technician Grade-II Syllabus at a Glance

DetailTechnician Grade-II (Electrical / Vidyut)Technician Grade-II (Mechanical / Yantrik)
Applicable organisationUJVNL and PTCULUJVNL
SubjectElectricalFitter trade
Number of units139
Exam typeWritten, objectiveWritten, objective
Total questions100100
Maximum marks100100
Duration2 hours2 hours

Technician Grade-II Exam Pattern

The selection for both posts has a single tier: a written examination with one paper of objective-type questions on the related subject.

SubjectTotal QuestionsMaximum MarksTime
Electrical (for Technician Grade-II Electrical)1001002 hours
Fitter trade (for Technician Grade-II Mechanical)1001002 hours

Technician Grade-II (Electrical) Syllabus

This syllabus applies to the Technician Grade-II (Vidyut) post and carries 100 marks. It is divided into 13 units.

Unit 1: Fundamentals of Electricity

Electrical charge, potential difference, voltage, current, electrical power, electrical energy, Ohm’s law, Kirchhoff’s law and their application, concept of resistor, inductor and capacitor, types of resistor, colour coding of resistor, equivalent resistance of series and parallel combination, RLC series and parallel circuits, Q-factor, resonance, concept of self and mutual inductance.

Unit 2: Cells and Batteries

Introduction to cells, construction and types of primary and secondary cells, introduction to batteries, material used in batteries, series and parallel connection of batteries and purpose of such connection, law of electrolysis, use of hygrometer.

Unit 3: Electrical and Electronics Measuring Instruments

Introduction of electrical measuring instruments, error and correction in instruments, types of instruments, PMMC, MI and MC instruments, uses in AC and DC, extension of range of measuring instruments, multimeter, CRO and its applications.

Unit 4: Fundamental Principles of AC

Average value, instantaneous value, peak value, R.M.S value, form factor, peak factor, concept of single and three phase system, star and delta connection, line voltage, phase voltage, line current, phase current, advantages of three phase over single phase, active, reactive and apparent power, power factor.

Unit 5: Fundamental Principles of Electronics

Difference between insulator, semiconductor and conductor, types of semiconductors, PN junction, biasing and characteristics of diode, types of diode, transistor, number system, logic gates symbols and truth table.

Unit 6: Cables and Protective Devices

Types of wire, conductors and cables, Standard Wire Gauge (SWG), types of insulation used in cables, concept of soldering, types of soldering, need of fuse, rating and types of fuse, circuit breakers, MCB, MCCB, ELCB, contactor, isolator, relays.

Unit 7: Renewable and Non-Renewable Energy Sources

Need of renewable energy sources, difference between renewable and non-renewable sources of energy, solar energy as a renewable energy source, basics of PV cell, module and solar panel PV array, principle and working of PV cell.

Unit 8: Inverter and UPS

Introduction of inverter and UPS, difference between inverters and UPS, types of UPS (offline UPS, on-line UPS, line interactive UPS) and their comparison, types of inverters.

Unit 9: Electrical Machines

Introduction of DC motors and its types, methods of speed control of DC motors, principle and construction of DC generators, different types of DC generators, introduction and types of three phase induction motors, slip, no-load and blocked rotor test, stepper motors, working principle of synchronous motors. Working principle, construction and classification of single phase transformer, auto transformer, instrument transformers (CT and PT), various losses in transformer.

Unit 10: Basic Knowledge of Computer and PLC

Basic knowledge of MS Word, MS Excel, PowerPoint presentation, parts of computer, basic knowledge of Programmable Logic Controller (PLC) and Supervisory Control and Data Acquisition (SCADA).

Unit 11: Transmission and Distribution Network

Basics of transmission and distribution network, line, insulator, overhead poles and towers, method of joining conductors.

Unit 12: Safety

Safety rules and safety signs, types of fire extinguishers, first aid, safety tools.

Unit 13: Concept of Various Terms

Average load, maximum demand, demand factor, load factor, diversity factor, concept of earthing.

Note: Current knowledge of scientific advancements related to all the above units, as per the NCVT (NSQF Level-4) syllabus of the Electrician/Electronics trade, is deemed to be included.

Download Technician Grade-II Syllabus PDF (Official)

The Commission has published the complete examination scheme and syllabus for both Technician Grade-II posts in a single 22-page PDF. Use it to cross-check any unit before you start your preparation.

Download the official UKSSSC Technician Grade-II syllabus PDF

The same notice is also available on the Commission’s official website, sssc.uk.gov.in.

Technician Grade-II (Mechanical) Syllabus: Fitter Trade

This syllabus applies to the Technician Grade-II (Mechanical) post and carries 100 marks. It is divided into 9 units.

Unit I: Maintenance and Safety

Maintenance and its types (productive, routine, preventive), colour coding of lubrication, installation and overhauling of machinery and engineering equipment, soft skills, importance of safety and general precautions observed in the industry/shop floor, introduction of first aid, introduction of PPEs, response to emergencies e.g. power failure, fire and system failure, importance of housekeeping and good shop floor practices, introduction to 5S concept and its application, occupational safety and health, material handling equipment, safety: self, fire and machines (lathe, welding, electrical, sheet metal, hydraulic, pneumatic etc.), foundation and handling of heavy machinery.

Unit II: Measuring and Marking Tools

Linear and angular measurements: calipers, dividers, try square, surface plate, Vernier height gauge, Vernier calipers and micrometer, hermaphrodite, Vernier bevel protractor etc. General hand tools and marking equipment: centre punch, dot punch, prick punch and their description, hammers, cold chisels (materials, types, cutting angles), use and care of ‘V’ blocks, angle plates, parallel block etc. Bench vice construction, types, uses, care and maintenance, vice clamps, hacksaw frames and blades, specification, description, types and their uses, method of using hacksaws. Files: specifications, description, materials, grades, cuts, file elements, uses, types of special files, care and maintenance of files, scrapper and its uses.

Unit III: Metals and Metallurgy

Physical properties of engineering metal, ferrous metal (pig iron, cast iron, wrought iron, steel: plain carbon steels), non-ferrous metals (copper, aluminum, tin, lead, zinc etc. and their alloys), heat treatment, various heat treatment methods (normalizing, annealing, hardening and tempering), case hardening and carburizing, metal coatings: chromium, silver plating, nickel plating and galvanizing.

Unit IV: Welding and Sheet Metal Operations

Commercial sizes and various types of metal sheets, shearing machine, sheet metal marking, measuring and cutting tools, types of joints (butt, lap and fillet), tolerance for various joints, their selection and application, wired edges, soldering and brazing, rivets and their types. Machines, accessories and hand tools of electric arc and oxy-acetylene gas welding, carbon dioxide welding, H.P. and L.P. welding equipment, gases and gas cylinder description, selection of welding electrodes, oxygen-acetylene cutting machine.

Unit V: Machining Operations and Automation

Hole making operations: drilling (counter sink, counter bore and spot facing), boring and reaming, their types and uses, drill geometry, drilling machines and drill holding devices, drill types: fractional, metric, letters and numbers, screw threads, taps and types. Abrasive operations: grinding, lapping, honing and frosting. Lathe: lathe specification, types of lathe and its accessories, constructional features, operations and main parts descriptions, setting tool for cutting internal and external threads, lathe cutting tools, cutting speed and feed, use of coolants and lubricants, chuck-mounting and dismounting.

Computer Numerical Control (CNC): introduction, definition and concept of CNC, main components and types of CNC machines, comparison between conventional machine tools and CNC machines, advantages and limitations of CNC technology, fundamentals of CNC programming, and overview of commonly used programming codes and machining operations.

Unit VI: Power Tools and Pipe Fittings

Power tools constructional features, uses and maintenance. Locking devices: nuts (lock nut, castle nut, slotted nuts, swam nut, grooved nut), description and uses. Various types of keys, allowable clearances and tapers, types, uses of key pullers. Pipes and pipe fitting: commonly used pipes, pipe schedule and standard sizes, pipe bending methods, use of bending fixture, pipe threads, standard pipe threads die and tap, pipe vices, use of tools such as pipe cutters, pipe wrenches, pipe bending machine etc. Standard pipe fitting: methods of fitting or replacing the above fitting, repairs and erection on rain water drainage pipes and household taps and pipe work. Inspection and quality control: basic SPC, visual inspection.

Unit VII: Hydraulics and Pneumatic System

Difference, comparison, principle and uses of pneumatics and hydraulics system, Boyle’s law, Pascal’s law, air compressors, air receiver, conductors and fittings, FRL unit, applications of pneumatics, hazards and safety precautions in pneumatic systems.

Pneumatic actuators: types, basic operation, force, stroke length, single-acting and double-acting cylinders.

Pneumatic valves: classification, symbols of pneumatic components, 3/2-way valves (NO and NC types) (manually-actuated and pneumatically-actuated) and 5/2-way valves, check valves, flow control valves, one-way flow control valve, roller valve, shuttle valve, two-pressure valve.

Electro-pneumatics: introduction, 3/2-way single solenoid valve, 5/2-way single solenoid valve, 5/2-way double solenoid valve, control components: pushbuttons (NO and NC type) and electromagnetic relay unit, logic controls. Symbols of hydraulic components, hydraulic oils (function, properties and types), contamination in oils and its control.

Hydraulic filters: types, constructional features and their typical installation locations, cavitation, hazards and safety precautions in hydraulic systems.

Hydraulic reservoir and accessories: pumps, classification (gear/vane/piston types), pressure relief valves (direct acting and pilot-operated types), pipes, tubing, hoses and fittings, constructional details, minimum bend radius, routing tips for hoses, hydraulic cylinders types.

Hydraulic motors: types of hydraulic valves, classification, directional control valves (2/2- and 3/2-way valves, 4/2- and 4/3-way valves), centre positions of 4/3-way valves, check valves and pilot-operated check valves, load holding function, flow control valves: types, speed control methods (meter-in and meter-out), preventive maintenance and troubleshooting of pneumatic and hydraulic systems, system malfunctions due to contamination, leakage, friction, improper mountings, cavitation, and proper sampling of hydraulic oils.

Unit VIII: Power Transmission, Lubrication and Bearings

Screw thread (square, worm, buttress, Acme) uses and application, use of screw pitch gauge for checking screw thread, assembling techniques, dowel pins, screws: material, designation, specifications, tools for tightening/loosening of screw or bolts.

Bearing: classification (journal and thrust), types, method of fitting, bearing metals (types, composition and uses), dressing, creep and slipping, consideration of weather, load and tension.

Power transmissions: belts and their types, sizes and specifications, materials, methods of joining leather belts, V-belts, use of commercial belts, pulleys, chains, wires, ropes, clutch, gears (nomenclature, types, velocity ratio, maintenance), repair of gear teeth by building up and dovetail method.

Method of lubrication, cutting lubricants and coolants, selection of lubricants, washers (types and calculation of washer sizes), joints and fitting packing.

Unit IX: Engineering Drawing, Computer Aided Design (CAD) and Workshop Calculations Science

Engineering Drawing and CAD: fundamentals of engineering drawing, types of lines, orthographic projections, sectional and assembly views, and interpretation of engineering drawings related to nuts, bolts, screw threads, locking devices, riveted and welded joints, pipes and pipe fittings, foundation drawings, and job drawings.

Computer-Aided Design (CAD): introduction, basic concepts and applications, drawing commands, creation and modification of 2D drawings, simple geometric shapes, dimensioning, layer management, and preparation of layouts for printing and plotting.

Workshop calculations and science: friction, centre of gravity, area of cut out regular surfaces and area of irregular surfaces, area of cut out regular surfaces (circle, segment and sector of circle), area of irregular surfaces and application related to shop problems, stress-strain curve and their numerical, problems on estimation and costing.

Note: Current knowledge of scientific advancements related to all the above units, as per the NCVT (NSQF Level-4) syllabus of Fitter trade theory, is deemed to be included.

Check the Complete Technician Grade-II Recruitment Details

The syllabus is only one part of the recruitment. For the full picture, including the posts under UJVNL and PTCUL, eligibility, selection process and other updates, read the complete UKSSSC Technician Grade-II recruitment details. It is the main page for this recruitment, so you can come back to it whenever a new update is announced.

Frequently Asked Questions (FAQs)

Q1. What is the exam pattern for UKSSSC Technician Grade-II?

Ans. The selection has a single written examination with one paper of objective-type questions. The paper has 100 questions, carries 100 maximum marks and has a duration of 2 hours for both the Electrical and the Mechanical post.

Q2. Is the syllabus the same for Technician Grade-II Electrical and Mechanical?

Ans. No. Technician Grade-II (Electrical) has a 13-unit syllabus covering electrical fundamentals, machines, measuring instruments, electronics and more. Technician Grade-II (Mechanical) has a 9-unit syllabus based on the Fitter trade, covering topics such as measuring tools, welding, machining, hydraulics and pneumatics.

Q3. How many units are there in the Technician Grade-II Electrical syllabus?

Ans. There are 13 units, starting with Fundamentals of Electricity and ending with Concept of Various Terms such as load factor, demand factor and earthing.

Q4. Is the NCVT syllabus part of the Technician Grade-II exam?

Ans. Yes, as per the official note. For Electrical, current knowledge related to all units as per the NCVT (NSQF Level-4) syllabus of the Electrician/Electronics trade is deemed to be included. For Mechanical, the same applies as per the NCVT (NSQF Level-4) syllabus of Fitter trade theory.

Q5. Is the Technician Grade-II syllabus the same for PTCUL and UJVNL?

Ans. The Electrical syllabus is a single syllabus for the exam conducted for both UJVNL and PTCUL. The Mechanical (Fitter) syllabus is released for the Uttarakhand Jal Vidyut Nigam (UJVNL) operational employee exam.

Q6. Where can I download the UKSSSC Technician Grade-II syllabus PDF?

Ans. The syllabus PDF is available on this page through the official link given above. It is also published on the Commission’s official website, sssc.uk.gov.in, with the notice dated 05 October 2026.