UKSSSC Surveyor (Sarvekshak) Recruitment 2025-26: Eligibility, Salary & Syllabus

Last Updated: Oct 13, 2026 | Source: Official UKSSSC Notification | sssc.uk.gov.in

UKSSSC has released Advt. 74/2025, which includes 6 vacancies for the post of Surveyor (Sarvekshak) under the Geology and Mining Directorate, Uttarakhand. This is one of 18 different posts covered under the same notification, and it comes with its own age limit, educational qualification, pay scale, and syllabus. If you are preparing for this post, here is everything you need to know: eligibility criteria, vacancy breakup, salary, job profile, and the complete syllabus, all verified against the official notification and syllabus PDF.

Surveyor Admit Card 2026

The admit card for the Surveyor written exam was released on 12 October 2026 on sssc.uk.gov.in, and the exam is scheduled for 18 October 2026. Admit cards are not sent by post or email, so download yours from the commission’s website. Make sure the barcode is printed on your copy, and carry a photo ID to the exam centre. The exam date, time and centre are printed on the admit card.

UKSSSC Technical Posts Admit Card 2026 – Surveyor

Eligibility Criteria

Age limit: 21 to 42 years, calculated as on 01 July 2025.

Mandatory qualifications (either one):

  • A diploma or certificate in Surveying (Sarvekshan Shilpkarita) from a recognised institution, from a course of at least two years, along with two years of experience
  • A Diploma in Civil Engineering

Preference given to:

  • At least two years of experience in tacheometric survey in hill areas
  • At least two years of service in the Territorial Army
  • Candidates holding an NCC “B” or “C” certificate

Vacancy & Reservation Breakdown

CategoryVacancies
Scheduled Caste (SC)2
Other Backward Class (OBC)1
Unreserved3
Total6

Of the 6 posts, 2 are reserved for women of Uttarakhand under horizontal reservation: 1 within the SC posts and 1 within the Unreserved posts. No vacancies are shown for ST or EWS.

Pay Scale & Pension

  • Pay Level: Level-5, ₹29,200 – ₹92,300
  • Pension: Contributory pension scheme
  • Nature of post: Non-gazetted, permanent

Job Profile

A Surveyor (Sarvekshak) works under the Geology and Mining Directorate, Uttarakhand. The notification does not describe the duties of the post. Based on the qualifications and the syllabus, the work points towards field surveying: chain, compass, levelling and theodolite surveys, plotting survey data, preparing maps, and engineering drawing with AutoCAD. This is drawn from the eligibility criteria, syllabus and department name, not stated explicitly in the notification.

Surveyor (Sarvekshak) Syllabus 2025-26

The exam is 100 marks. The syllabus is spread across 10 units:

Unit 1: Introduction to Surveying. Basic principles, concepts and purposes of surveying; linear and angular measurements and units; instruments used for measurement; classification of surveying; conventional signs and symbols; recording of field notes; role of the surveyor in detailed surveying, plotting of survey data, preparation of survey maps and setting out works.

Unit 2: Linear Measurement (Chain and Tape). Purpose and principles of chain surveying; its advantages and disadvantages; instruments used; errors and corrections; direct and indirect ranging; types of offsets and obstacles in chain surveying; types and classification of tapes.

Unit 3: Compass Surveying. Purpose and use of prismatic and surveyor’s compasses; setting up the instrument and taking observations; true and magnetic meridian; magnetic, true and arbitrary meridian; whole circle and reduced bearings; fore and back bearings; magnetic dip and declination; latitude and departure; local attraction (causes, detection, errors and corrections); numerical problems on local attraction, magnetic declination, included angles in a traverse and adjustment of closing errors.

Unit 4: Levelling. Level surface, horizontal and vertical surfaces, datum, reduced level and benchmarks; dumpy level (parts and usage) and auto level; line of collimation, axis of bubble tube, axis of telescope and vertical axis; levelling staff types (single-piece, folding, invar precision, telescopic); temporary and permanent adjustments; back sight, intermediate sight, fore sight, change point and reduced level determination; level book entries and reduction of levels by the Height of Instrument and Rise and Fall methods, with arithmetic checks and numerical problems; types of levelling (fly, check, profile with L-section and cross-section, reciprocal); errors in levelling and permissible limits; computation of areas and volumes of regular and irregular figures using Simpson’s rule, prismoidal formula, trapezoidal formula and graphical methods, with numerical problems.

Unit 5: Plane Table Surveying. Purpose, advantages and disadvantages; equipment used; plane table setup (centring, levelling and orientation); methods of orientation; methods of plane tabling (radiation, intersection, traversing and resection); two-point and three-point problems; errors and precautions; testing and adjustments of the plane table.

Unit 6: Contouring and Tacheometry. Concepts and purpose of contouring; characteristics of contours; contour interval, contour gradient and horizontal equivalent; factors affecting contour interval; direct and indirect methods; use of stadia measurements in contouring; interpolation and uses of contour maps; drawing cross-sections from contour maps; earthwork and reservoir capacity computations using a contour map; tacheometry (principles and stadia method) and its instruments; study of topographical maps and basic concepts of latitude and longitude.

Unit 7: Theodolite Surveying. Introduction and working principles; types and components of a theodolite; relationship between theodolite axes; temporary and permanent adjustments; transiting, swinging, face left/right and changing face; measurement of horizontal and vertical angles; prolongation of lines (forward and backward); measurement of bearings; traverse methods (included angles and deflection angles); traversing using stadia measurements; theodolite triangulation and plotting of traverses; coordinates and solutions for omitted measurements; common errors and precautions; limits of precision in theodolite traversing; determination of object heights with accessible and inaccessible bases.

Unit 8: Curves. Simple circular curves: purpose, definition and key elements, degree of curve, setting out by linear measurements (offsets from tangent, successive bisection of arcs, offsets from the chord produced) and setting out with a theodolite using angular measurements. Transition curves: purpose and definition, requirements of an ideal transition curve, length and calculation of offsets, setting out using tangential offsets. Vertical curves: setting out methods.

Unit 9: Modern Surveying Equipment and Minor Instruments. Total Station; introduction to remote sensing and GPS; Electronic Distance Measurement (EDM); digital theodolite and other digital equipment; minor instruments and their uses: Ceylon Ghat Tracer, Clinometer, Pantograph, Abney Level and Planimeter (used for area computation).

Unit 10: Engineering Drawing and CAD. Drawing equipment and layout of drawing sheets; symbols, conventions, lettering styles and numbering; types of lines and dimensioning; types of scales and their construction; construction of plane geometrical figures, curves and conics; introduction to AutoCAD, including commonly used commands and keyboard shortcuts.

As per the syllabus note, current scientific advancements relevant to all the above units are deemed to be included.

Age relaxation, the exam pattern with negative marking and qualifying marks, and the Uttarakhand residency conditions are the same for all 18 posts, so they are explained once in the common rules for all 18 posts of Uksssc Techincal .

Frequently Asked Questions

Q1. How many vacancies are there for Surveyor (Sarvekshak)?

Ans. 6 vacancies: 2 for Scheduled Caste (SC), 1 for Other Backward Class (OBC) and 3 for Unreserved candidates.

Q2. What is the minimum educational qualification?

Ans. A diploma or certificate in Surveying from a recognised institution (course of at least two years) with two years of experience, or a Diploma in Civil Engineering.

Q3. What is the pay scale for this post?

Ans. Level-5, ₹29,200 – ₹92,300, under the contributory pension scheme.

Q4. Is this a permanent post?

Ans. Yes. The notification lists it as a permanent, non-gazetted post.

Q5. What is the age limit?

Ans. 21 to 42 years, calculated as on 01 July 2025.

Q6. When is the Surveyor exam and where do I get the admit card?

Ans. The written exam is scheduled for 18 October 2026. The admit card was released on 12 October 2026 and can be downloaded only from the official UKSSSC website, as it is not sent by post or email.